Advantages of Wet Mix Macadam Plant

Advantages of Wet Mix Macadam Plant

Wet Mix Macadam Plant (WMM) is designed for contractors who want a piece of reliable equipment for road construction projects. The WMM is designed with precision so that contractors utilize the plant to the maximum. WMM comes in different capacities of 100 tph, 160 tph and 200 tph. This gives a contractor many options for his project requirement. Wet Mix Plant helps contractors make a homogenous mix of base or sub-base layers before the hot mix asphalt is laid.

Why is Wet Mix Macadam used?

A wet mix macadam road is more durable than a WBM road. The WMM roads dry faster than a WBM road and can be opened to traffic in less time, whereas WBM road takes a month to get dry. Even the construction of WMM road is faster.
Water-bound Macadam (WBM) materials consist of stone aggregates, binders, and screening materials. In a WMM, only stone aggregates and binders are used. The Stone aggregates are larger when used in WBM and vary from 90 mm to 20 mm depending upon the grades. However, in WMM, the stone aggregates are smaller, and the size varies from 4.75 mm to 20 mm.

While the measurement in WBM is in cubic meters, the WMM is measured in square meters.

Components of a wet mix Macadam plant

A wet mix macadam plant is one of the most proven machines for road construction. It comes with a host of features, including quality components. The design of a macadam plant is simple, and the control panel is easy to use. The rugged mixing unit is long-lasting and designed for rough and continuous use. They can work effortlessly under extreme conditions.


The standard components areas:

  • Charging conveyor
  • Cold Feeder Bins
  • Water tank
  • Mixing unit
  • Cement silo and screw conveyor
  • Storage hopper
  • Loadout conveyor
  • Control panel

Advantages of a WMM plant

The success of a macadam plant depends on how compatible its components is a must. Some of the major advantages are given below:

The pedestals and the size of the shafts are used in the pug mill. Each pedestal has three shafts, and the size of each shaft used in the Pugmill is 5 inches. The Pugmill with wet mix macadam plant is equipped with high-quality materials. Cement can be added to the machine with a cement silo or hopper. An advanced PLC type control panel is provided along with the machine.

Wet mix macadam plants are effective machines that make wet mix easily. A wet mix plant helps achieve higher production with low maintenance and savings in energy. The solid built and quality of the macadam plant is the reason why it is preferred by many contractors worldwide.

No Comments

Sorry, the comment form is closed at this time.

Translate »

[contact-form-7 404 "Not Found"]

[contact-form-7 404 "Not Found"]

[contact-form-7 404 "Not Found"]

[contact-form-7 404 "Not Found"]

[contact-form-7 404 "Not Found"]

[contact-form-7 404 "Not Found"]