Road Carpeting Machine – A Useful Machine for Repairing & Construction of Roads

Road Carpeting Machine – A Useful Machine for Repairing & Construction of Roads

Road construction ventures require a great deal of planning, expertise, manpower, and specialized equipment to successfully complete projects. Construction is a significant sector as it plays a pivotal role in infrastructural development. Hence, there always has been a lot of emphasis on the use of different equipment in use in this sector. Today, there are many types of road construction machines used in the road construction industry.

The Road roller is the most commonly used in road constructions, especially in paving or carpeting the road. They come in different types, such as drum rollers, vibratory rollers, pneumatic tyred rollers, and smooth wheeled rollers. Apart from rollers, other machines used for paving roads include asphalt Compactors, chip spreaders, seal coaters, motor graders, maintainers, etc.

The type of rollers like double drum asphalt roller, rubber tire roller, or combination roller is used according to the bituminous mixture that will be used in the road.

A Road carpeting machine requires the paver screed, steel-wheeled roller, and pneumatic tire roller. Each of these three pieces of equipment works to compress and compact the hot mix asphalt to the underlying surface for the asphalt paving road project.

What is a carpeted road?

In the early days, road carpet was meant as patching roads. Now carpeting roads means outdoor carpet meant for withstanding the vehicle traffic load. A road carpet is an immediate solution covering exposed and damaged parts of a road. A road, deteriorated, splintered, cracked surfaces are repaired effectively by carpeting.

Road equipment uses premix carpet, which is the oldest type of hot mix. The premix is an economic bituminous mix placed directly to Water Bound Macadam (WBM) that is usually found on low-volume rural roads. The premix carpet also consists of a bituminous sand seal coat to reduce rainwater penetration.

The most used materials for paving roads are asphalt and concrete. The quality of bitumen used will depend on the cost of the project and the volume of traffic that will play on the road. A bituminous premix carpet is widely used on urban roads to overlay a portion of urban sections, whereas it is used completely for the road surface in rural areas.

For road, carpeting asphalts are used instead of concrete because concrete is more prone to developing cracks because the surface is hard and rigid. The sand and stones are used in proportion to the cement and act as a binder. The asphalt or bitumen can withstand heavy vehicular loads once it dries up and becomes strong.

The function of the Road carpeting machine

The road carpeting machine is basically the asphalt paver machine that lays the asphalt on the road’s surface. The asphalt or the bituminous pre mix is loaded into the machine, which spreads out and lays the asphalt as it moves along on the road. The asphalt mix is levelled and compacted by a machine part called the paver screed. The paver screed provides the initial compaction.

No Comments

Sorry, the comment form is closed at this time.

Translate »